Connect with us

Industry

Why Are Used Pallet Racks Better Than New Ones?

Published

on

why-are-used-pallet-racks-better-than-new-ones

Whether it’s the augmentation or migration of warehouses, pallet racks are a worthy addition to the collection of technical equipment. They are one of the fundamental components of every industrial setup. So it is essential to do a bit of research before buying them.

These days, used pallet racking is a prevalent option. In contrast to new racks, second-hand or used racks have a lot of advantages. This article will focus on the advantages of used pallet racks over new ones so that a consumer can make a conscious decision.

Cause of purchase

There might be various reasons for a consumer to purchase pallet racks. They help in the proper cataloging and storage of goods. Also, the problem of a space crunch is solved by utilizing most of the warehouse’s vertical space. Protection of bottom line goods is of utmost importance as they are most vulnerable to rough handling, pest attacks, or losses. Buying and installing pallet racks can solve these problems by keeping the goods above a certain level off the ground.

New Racks Vs. Used Racks

New pallet racks

● High costs

Purchasing a new pallet rack is associated with the high capital expenditure of buying new material. A new setup also incurs the additional costs of assembling and installing the racks at the additional cost of manual labor.

● Assembly

Assembly of new pallet racks is a challenging and tedious process. Basically, everything has to start from point zero, which is very complicated.

● Time

Time is wasted on the setup of new pallet racks.

● Durability

It is impossible to judge the durability of new pallet racks. The consumer has to have a certain degree of trust in the supplier before buying these. It makes them prone to exploitation.

Used pallet racks

● Low cost

Used or second-hand pallet racks are comparatively cheaper than new ones. The buyer can thus get more value out of lesser capital expenditure. Savings can then be put to better use.

● High quality

If a consumer buys a used pallet rack, then he/she can be assured regarding the quality or durability of the material. The fact that it survived for so long and is now being sold to another user means it has succeeded for so long. So, there is a sense of security in buying used racks.

● Wide range

Pallet racks of different varieties come with additional costs. Buying used versions lower these costs, and the consumer achieves the liberty to buy a wide diversity of them according to the requirements.

● Ease of assemblage

Used pallet racks are generally already assembled in a systematic order when a new owner buys them. It saves the time of the consumer and makes its operations easier.

● A temporary but durable alternative

Used pallet racks are often used by industries or individuals who are in a fix about their management process. Relocation or expansion of industries becomes tough if additional costs arise. These racks serve as a temporary solution to this problem while keeping the production process flowing without any hindrance.

● Environment friendly

Buying used pallet racking shall increase the overall life cycle of a material. It will prevent waste generation due to manufacturing, transportation, and the installment of new racks. Also, used racks shall prevent the wastage of human resources and other operational resources required for a new pallet rack. Thus, it is a highly sustainable option.

Conclusion

The debate of new vs. old pallet racks shall go on. Overall, used pallet racks are a much better choice as they work on the shortcomings of new racks. It ensures a positive outlook and contribution toward individual and environmental well-being. Decide what’s best for you.

Click to comment

Leave a Reply

Your email address will not be published.

Industry

Critical Things to Consider When Choosing a Portable Sandblaster

Published

on

critical-things-to-consider-when-choosing-a-portable-sandblaster

Purchasing or renting equipment for your workshop or professional company can be challenging, especially if you are looking for something sophisticated like a sandblaster. However, keeping a few key points in mind can make the job a tad easier, enabling you to get the best one possible for your needs.

To illustrate: when it comes to a sandblaster portable ones are best since you can quickly move them from one site to others, allowing you to do a more accurate job on site. There are other benefits of using this variant, some of which are elucidated below.

Also, the following information contains vital aspects to remember when selecting a portable machine for your blasting needs.

Features

Of all the sandblasting machines, the portable variety is the most sought-after because of its reliability and remarkable features. For one, it has a manual media valve that allows you to control the mix for maximum efficiency. Next, good models allow you to choose from various depressurization options, such as pressure hold, auto-depress, or a combination of both. Lastly, reliable ones have pressure valves approved to work up to 150 PSIG.

Besides the above-listed qualities, ensure the machine you wish to buy has robust steel that gives it durability and strength.

When it comes to capacity, note that portable sandblasters come in various tank capacities, which determine the amount of abrasive media that can fit, impacting the blasting autonomy. While the tank capacities differ from one supplier to another, it typically ranges from 3.5 cu.ft., which gives approximately fifteen minutes of blasting autonomy, up to 20 cu.ft. (or more), giving roughly an hour and thirty minutes of autonomy.

Note that the bigger the tank capacity, the larger and heavier the machine, making it less portable. So, determine which one suits your specific requirements more accurately, depending on the autonomy and the ease of portability you seek.

Indoor applications occur in a blast booth with a reclaiming system with a storage hopper fitted on top of the blast pot. Typically, a 6.5 cu.ft.-blast pot that can be fed from the storage hopper is used for practically unlimited blasting autonomy.

Where and how can it be used?

The portable model is convenient in various applications across diverse industries, primarily due to its ergonomic features and lightweight. Popular examples include industrial facilities that require daily cleaning of a range of metal pipes and other surfaces, civil construction companies, and automotive manufacturers. It is also widely convenient in the agricultural and mining sectors, wherein experts often apply blasting to clear debris from large appliances.

But what is it used for?

The machine can reduce more than ninety percent of human effort in cleaning various surfaces of debris, rust, and other unwanted elements. It can also remove different kinds of paints and carbon deposits within a matter of minutes, besides making a rough exterior incredibly smooth. Moreover, you boost their longevity and quality by using the appliance to keep metal surfaces and machines clean. One of its most amazing perks is that it allows operators to work on challenging corners, metal edges, and surfaces that are otherwise impossible to reach.

So, ensure it has all the above qualities before making the purchase.

Supplier reputation

Besides checking the features of the sandblaster, portable or not, you should carefully vet the vendor you wish to buy from. It will ensure you receive the best product for your requirements, enabling you to save money and time. For instance, consider if they supply other equipment that may suit your industry, such as spray systems, dust collection machinery, shot blasting tools, solvent distillation, and industrial washers.

Similarly, check if their products meet industry standards, quality assurance, and other guidelines, ensuring safety. Also, it helps to find a manufacturer who can customize products as per your specifications, allowing you to avail yourself of the most accurate machines for the task. Lastly, choosing a supplier with decades of experience and high standards is critical, as it will help you rely on them for all your equipment needs for years to come.

Continue Reading

Industry

How to Prepare Samples for XRF Analysis?

Published

on

Proper sample preparation is of paramount importance in any quantitative analysis method, including X-ray fluorescence analysis, although the XRF method has an advantage over other quantitative analysis methods in this regard, since it requires relatively simple sample preparation for measurement. There are various methods for sample preparation prior to chemical composition analysis using XRF spectrometers. The choice of a specific method depends on the task, in particular the required accuracy, marginal cost and labor intensity of the process. As a rule, along with an increase in the accuracy of analysis due to the chosen method of sample preparation, the price and complexity of this method also increase.

Basic requirements for samples for XRF analysis:

• The measured sample must be representative of the rest of the sample, i.e. reflect its composition as a whole, and not its specific area

• The sample must be homogeneous and have a smooth surface.

• The sample must remain stable throughout the measurement.

• Sufficient sample thickness (usually in the order of millimeters).

It should be noted that a sample preparation method other than that used to calibrate the instrument should not be used, since the measurement of a powder sample with an instrument calibrated on solid samples will have negative effect on the accuracy of the analysis. Let us consider in more detail the main sample preparation methods used in XRF guns.

Solid samples

When analyzing solid samples such as alloys or precious metals, it is important to have a clean, flat surface on which to measure. In the case of an uneven surface, X-rays scattered by different points on the surface will travel different distances before hitting the detector, and the rays scattered from more distant points on the surface will scatter more strongly in the environment, which can lead to errors in the measurement results. To obtain a smooth and flat surface, the sample is usually ground. However, even if the sample already has a fairly smooth surface, it should still be cleaned before measurement. Solid samples should be cleaned with a file, and different files should be used for different types of samples, because if, for example, a copper alloy is cleaned with a file that was used to clean aluminum before, aluminum particles brought to the surface will be detected during measurement.

Powder samples

For the analysis of powder samples, such as soils, it is necessary to finely grind a mass sufficient for the analysis (usually about 15 grams) of the sample, and ensure its homogeneity by thoroughly mixing. The accuracy of the analysis in the case of powdered samples will be the higher, the more thoroughly the sample is crushed. The resulting powder is placed in a special cuvette, and measured in this form.

An alternative is to compact powdered samples. As in the previous method, the sample must be finely ground before compaction, ideally the particle size should not exceed 75 nm. This method is more complicated and time consuming than measuring powders in cuvettes, but provides a better quantification result due to the absence of empty areas between particles in the cuvet.

Liquid samples

Similarly to powder samples, liquids are measured by pouring them into special cuvettes. However, it should be noted that for the measurement of liquids, unlike powders, only open cuvettes are used, since liquids partially evaporate over time, which leads to film swelling in closed cuvettes. An important role in the measurement of liquids is played by the choice of the film covering the cuvette. Different films have different characteristics, such as X-ray transparency or strength, and the choice depends largely on the task.

Fusion

The most time-consuming and expensive option for sample preparation for X-ray fluorescence analysis is the fusion of the test sample with a flux with a flux/sample ratio from 5 to 1 to 10 to 1. To do this, the sample is melted at a temperature of 900-1000C, mixed with flux and placed in a mold with a flat bottom. The advantage of this method is the reduction of the influence of mineralogical and matrix effects on the analysis results, which makes it possible to obtain more accurate results in the analysis of the elemental composition. However, due to the strong dilution of the sample, this method of sample preparation has a negative effect on the detection limits for elements contained in the sample at low concentrations.

Conclusion

Thus, there are many methods for preparing a sample for analysis by X-ray fluorescence analysis, and the choice of the most appropriate method in a particular task is to find a balance between the required accuracy of the results, the cost and the complexity of sample preparation.

Continue Reading

Industry

Business Training Has Gone High-Tech in Every Industry

Published

on

business-training-has-gone-high-tech-in-every-industry

Have you been through a work-based training program lately? Or, if you’re an owner or manager, have you designed one? Gone are the days when new hires spent the first few days of their jobs reading through corporate manuals and signing off on having completed training courses that consisted of nothing but short written tests.

Today’s new employees go through highly structured processes called onboarding, which typically consists of a combination of on-the-job training, shadowing an experienced team member, and assorted tests that actually measure how much information they’ve absorbed. One of the main reasons businesses fail is making poor choices in the recruiting and onboarding stages. In the majority of organizations, bringing a fresh worker into the company family takes between a week and three months, depending upon how complex the work is. For staff accountants, day one might include taking part in a live client engagement and watching the team in operation.

Drivers who earn their living on the road in the transport industry might spend hours in simulators and then use dashcams for interactive ride-along sessions on their first few routes. Securities brokers in the 2020s will discover that their early weeks behind the desk are mostly spent on the phone, conversing with real or fictitious clients. There’s a lot of role-playing for brokerage workers because the job still involves a huge amount of customer contact. Human Resources functionaries face hours of online reading and testing on a wide range of topics regarding legal compliance. Finally, in a healthcare environment that’s top-heavy with technology, new hires learn about telehealth and secure data storage applications. The following details reveal a modern workplace that is inundated with technology from top to bottom.

Transportation

The truck transport sector is more technologically sophisticated than outsiders realize. For instance, real-time, high-resolution dash cams are now a standard component of the modern cab. Via video hookup, fleet supervisors can visually ride along with drivers during lengthy training sessions. There is multiple safety and financial benefits to operating this way. It’s important for anyone in the transport industry to understand the inherent advantages of using live streaming cams to teach drivers the essential aspects of their jobs. To learn more about the process, review a detailed guide that explains how driver privacy is safeguarded, how live-streaming happens in real delivery situations, what the benefits are, and how to select the most suitable in-cab dashcams for your company’s vehicles.

Accounting

For professionals in the accounting field, robots are a central part of the early training process for fresh hires. Sophisticated software does an impressive job of teaching company policies, guiding workers through educational modules, and serving as practice clients who interact as real humans do. The apps are so good that some accountants-in-training aren’t sure whether the instruction is coming from coworkers, bosses, or bots.

Healthcare

The medical field is perhaps the commercial world’s biggest user of high-end technology for teaching new workers how to get their jobs done. That’s because the entire industry, from bottom to top, has been following some of the biggest healthcare tech trends and upgrading its systems and processes for more than a decade. Key functions like billing, patient contact, routine health exams, consultations, and data collection are partially or fully automated. The advent of widespread telehealth video visits with doctors at the height of the COVID pandemic was a turning point for the healthcare sector.

Continue Reading

Trending